MCH2022 badge?
go to mch2022.badge.team

Content """Game of Life Conway's Life, optimized for performance. """ ROWS = 8 COLS = 32 # "Live" cell colors to randomly choose from COLORS = [ (0x00, 0xFF, 0x00), (0x00, 0x00, 0xFF), (0xFF, 0x00, 0x00), (0xB8, 0xE9, 0x86), (0xF8, 0xB7, 0x00), (0x50, 0xE3, 0xC2), (0xFE, 0x13, 0xD4), (0x90, 0x13, 0xFE), ] # Fade-out color palette (reverse order). Must contain 9 elements. # https://colordesigner.io/gradient-generator is a good place to make one. palette = [ (52, 41, 51), (68, 50, 58), (83, 60, 63), (96, 71, 67), (106, 84, 71), (114, 98, 77), (118, 113, 87), (119, 128, 100), (250, 250, 110), # Gets replaced with one of the live colors above ] BOARD_DENSITY = 0.3 # proportion of live cells when creating a new board MAX_ROUNDS = 200 # reset if the same board runs for too long PRINT_TIMING = False DEFAULT_SETTINGS = {"delay_ms": 250, "mode": "fade_out"} from random import choice, random, seed import sys import time APP_NAME = "fast_life" settings = DEFAULT_SETTINGS.copy() if hasattr(sys, "mpycore"): import buttons import defines import rgb import valuestore import virtualtimers settings.update(valuestore.load(APP_NAME, "settings") or {}) else: from unittest.mock import Mock buttons = Mock() defines = Mock() rgb = Mock() valuestore = Mock() virtualtimers = Mock() def vtimers_new(d, callback): while True: time.sleep(callback() / 1000) virtualtimers.new = vtimers_new time.ticks_ms = lambda: time.monotonic() * 1000 time.ticks_diff = lambda a, b: a - b # The actual board is inset in a larger board, leaving one cell of padding # around each edge. CELL_COUNT = (COLS + 2) * (ROWS + 2) OFFSET = COLS + 3 def print_board(board): """Print the board to the console.""" board_str = str( bytes(board) .replace(b"\x00", b" ") .replace(b"\x01", b"1") .replace(b"\x02", b"2") .replace(b"\x03", b"3") .replace(b"\x04", b"4") .replace(b"\x05", b"5") .replace(b"\x06", b"6") .replace(b"\x07", b"7") .replace(b"\x08", b"8") .replace(b"\x09", b"9"), "ascii", ) for y in range(ROWS + 2): start = y * (COLS + 2) print(board_str[start : start + COLS + 2]) def show_board(board): """Put the board on the display.""" rgb.disablecomp() rgb.clear() pos = OFFSET for r in range(ROWS): for c in range(COLS): if board[pos]: if settings["mode"] == "fade_out": # Fade effect after cells die rgb.pixel(palette[board[pos] - 1], (c, r)) else: # Only show cells that are alive if board[pos] == 9: rgb.pixel(palette[8], (c, r)) pos += 1 pos += 2 rgb.enablecomp() if not hasattr(sys, "mpycore"): show_board = lambda board: print_board(board) def randomize_board(board, density=0.3): """Randomly populate cells in the board. We leave an empty cell of padding on all four sides to simplify neighbor calculation. """ for i in range(COLS * ROWS): board[OFFSET + i + 2 * int(i / COLS)] = 9 if random() <= density else 0 def evolve_board(board_in, board_out): """Run the Life algorithm to convert board_in to board_out""" pos = OFFSET for r in range(ROWS): for c in range(COLS): count = ( (board_in[pos - COLS - 3] == 9) + (board_in[pos - COLS - 2] == 9) + (board_in[pos - COLS - 1] == 9) + (board_in[pos - 1] == 9) + (board_in[pos + 1] == 9) + (board_in[pos + COLS + 1] == 9) + (board_in[pos + COLS + 2] == 9) + (board_in[pos + COLS + 3] == 9) ) if board_in[pos] == 9: # Any live cell with two or three live neighbors survives. board_out[pos] = 9 if count in {2, 3} else max(0, board_in[pos] - 1) else: # Any dead cell with three live neighbors becomes a live cell. board_out[pos] = 9 if count == 3 else max(0, board_in[pos] - 1) pos += 1 pos += 2 reset_flag = True def reset_game(): global reset_flag reset_flag = True def run_game(): board = bytearray(CELL_COUNT) next_board = bytearray(CELL_COUNT) board2 = bytearray(CELL_COUNT) board3 = bytearray(CELL_COUNT) round = 0 # improve randomness (taken from Simon Says) seed(int(1000000 * time.time()) % 1000000) def do_reset(): global reset_flag, COLORS, palette nonlocal board, next_board, board2, board3, round randomize_board(board, BOARD_DENSITY) next_board = bytearray(CELL_COUNT) board2 = bytearray(CELL_COUNT) board3 = bytearray(CELL_COUNT) palette[8] = choice(COLORS) round = 0 reset_flag = False def do_frame(): nonlocal board, next_board, board2, board3, round global settings, reset_flag if reset_flag: do_reset() show_board(board) t1 = time.ticks_ms() evolve_board(board, next_board) t2 = time.ticks_ms() if PRINT_TIMING: print( "round {} evolved in {:.3f}s".format( round, time.ticks_diff(t2, t1) / 1000 ) ) if next_board == board or next_board == board2 or next_board == board3: print("Board finished; resetting.") reset_game() return settings["delay_ms"] * 3 round += 1 if round > MAX_ROUNDS: print("Bored of this board; resetting.") reset_game() return settings["delay_ms"] * 3 (board3, board2, board, next_board) = (board2, board, next_board, board3) return settings["delay_ms"] def button_a(pressed): if pressed: rgb.clear() reset_game() def button_up(pressed): global settings, APP_NAME if pressed: new_delay = settings["delay_ms"] + 25 if new_delay <= 5000: settings["delay_ms"] = new_delay valuestore.save(APP_NAME, "settings", settings) else: rgb.background((127, 127, 127)) time.sleep(0.1) rgb.background((0, 0, 0)) def button_down(pressed): global settings if pressed: new_delay = settings["delay_ms"] - 25 if new_delay >= 25: settings["delay_ms"] = new_delay valuestore.save(APP_NAME, "settings", settings) else: rgb.background((127, 127, 127)) time.sleep(0.1) rgb.background((0, 0, 0)) def button_left(pressed): global settings if pressed: settings["mode"] = "live" if settings["mode"] == "fade_out" else "fade_out" valuestore.save(APP_NAME, "settings", settings) buttons.register(defines.BTN_A, button_a) buttons.register(defines.BTN_UP, button_up) buttons.register(defines.BTN_DOWN, button_down) buttons.register(defines.BTN_LEFT, button_left) # Use 25 for period, because 10 interferes with button detection virtualtimers.begin(25) virtualtimers.new(25, do_frame) run_game()